Default welcome msg!

Καλαθι Αγορων0 item(s) in Your CartΟλοκλήρωση Αγορών

35 FS (4-stroke) gasoline engine - ROTO Motor

Γράψτε πρώτος μια αξιολόγηση για αυτό το προϊόν

Availability: Αμεσα διαθέσιμο

780,00 €
35 FS (4-stroke) gasoline engine - ROTO Motor is available for purchase in increments of 1

Γρήγορη Επισκόπηση

Static thrust: 8,5 kg
Capacity: 35 ccm
Bore: 39,5 mm
Weight: 1790 g
Practical range (rpm): 1200 - 600 rpm (at 20x10 prop.)
Fuel: Gasoline + Motul 600 oil in 1:40 ratio
Prop. recommended: 20x10 (2-blade)

35 FS (4-stroke) gasoline engine - ROTO Motor

Περισσοτερες Οψεις

Λεπτομέρειες

ROTO 35 FS - single cylinder four stroke gasoline RC airplane engine ROTO motor 35 FS is single cylinder 4 stroke gasoline engine made specifically for the model airplanes up to 3.5 m (11.5’) and 12 kg (26.5 lb). These dates are for recreational flying. The Engine was developed in Europe with the assistance of CAD systems (Solidworks) and optimized for the liquid flow in the Flow software (made by Solidworks). All ROTO engines and its components are made and programed by utilizing the state of art 5 axis machinery made by American companies HASS and Siemens NX. Every engine, made by ROTO MOTOR Company is bench tested and adjusted by qualified technician on the Engine Star equipment to ensure its peak performance. Set contains: ROTO 35 FS engine (spark plug) Walbro carburetor mounted Electronic ignition system Hex key Silicon hose Metal exhaust Air intake Manufacturing technology ROTO 35 FS Crank case (kit) – it is rough-worked of the cast at the CNC milling cutter. After that it is covered or slashed with a special colour. Cylinder (roll) – it is made of one piece of dural with pressed insole from the mild-granular cast iron, it is sharpened and honed to the correct size. Piston – it is casted from silicon alloy with one sealing circle. The aparature for the bung 8 mm is honed. Piston rod – it is forging, which is completely worked. Two needle focuses are moulded into piston rod, it is made for the piston and cranked bung. Crank shaft – it is made of one piece of steel, it is cemented and hardened and it is completely sharpened. Back lid of the engine – it is worked casting, in which is hardened and sharpened rolled slide - valve layed.

Επιπρόσθετες Πληροφορίες

ΚΩΔΙΚΟΣ ΠΡΟΪΟΝΤΟΣ ROTO 03-0001
Age 18 ετών
User Level Medium
Length (mm) Όχι
Weight(gr) Όχι
Airplane Wing Span (mm) Όχι
ΔΙΑΜΕΤΡΟΣ ΕΛΙΚΑΣ (mm) Όχι
Scale Όχι
Manufacturer ROTO ENGINE

Ετικέτες Προϊόντος

Χρησιμοποιήστε κενά για να διαχωρίσετε ετικέτες, Χρησιμοποιήστε μονά εισαγωγικά (') για φράσεις.